rejma0415
Well-Known Member
Hey ex guys!
As you may or may not know, ARR have been carrying the double liner long burn casting tube and liner sets in 54mm and 75mm. Ive had a few people interested in having a 98mm set made up. Phenix Tube and I have run up a spec on these, but I am hesitant to drop a grand on a couple dozen sets or more w/o at least a modicum of preorder interest. They are not cheap for a host of reasons (labor, quantity, etc) and are $59 per 4 foot triple set. They are designed to fit Loki / AMW / TruCore hardware ID, any quarter inch wall 98s. You should be able to get 10 seconds on these if they are set up in your motor properly. Here are the specs:
Liner # 1: 3.336" ID x .070" wall x 3.480" OD (standard liner dimensions for 98mm quarter inch wall hardware)
Liner # 2: 3.175" ID x .072" wall x 3.320" OD x (same OD of normal casting tube but thicker and made of phenolic)
Casting: 3.089" ID x .038" wall x 3.165" OD x (white glassine kraft paper casting tube with typical wall thickness)
Ill pull the trigger if I can get 10 or so..
Thanx!
Randy
www.alwaysreadyrocketry.com
[email protected]
813-484-1298
P.S. Here it is on the webstore:
https://www.alwaysreadyrocketry.com/Products/tripleset.html
As you may or may not know, ARR have been carrying the double liner long burn casting tube and liner sets in 54mm and 75mm. Ive had a few people interested in having a 98mm set made up. Phenix Tube and I have run up a spec on these, but I am hesitant to drop a grand on a couple dozen sets or more w/o at least a modicum of preorder interest. They are not cheap for a host of reasons (labor, quantity, etc) and are $59 per 4 foot triple set. They are designed to fit Loki / AMW / TruCore hardware ID, any quarter inch wall 98s. You should be able to get 10 seconds on these if they are set up in your motor properly. Here are the specs:
Liner # 1: 3.336" ID x .070" wall x 3.480" OD (standard liner dimensions for 98mm quarter inch wall hardware)
Liner # 2: 3.175" ID x .072" wall x 3.320" OD x (same OD of normal casting tube but thicker and made of phenolic)
Casting: 3.089" ID x .038" wall x 3.165" OD x (white glassine kraft paper casting tube with typical wall thickness)
Ill pull the trigger if I can get 10 or so..
Thanx!
Randy
www.alwaysreadyrocketry.com
[email protected]
813-484-1298
P.S. Here it is on the webstore:
https://www.alwaysreadyrocketry.com/Products/tripleset.html