98mm Loki cases

[DannyB]

Hi all, I'm looking for a new or used 98mm case only. I'd like Loki or anything compatible with Loki bulkhead and nozzles (don't care if reloads are compatible). And does anyone know the cross compatibility for 98mm cases used in ex only? Thanks!

 

[jimzcatz]

I have a used one. I think it's a 4 grain. Make me an offer I can't refuse!

 

[DannyB]

Pm sent. Thanks Jim!

 

[DannyB]

Still looking for more 75mm Loki cases, would prefer a 5000 or 7500 but will also take a 10000 or 12500.

 

[3stoogesrocketry]

Still looking for more 75mm Loki or similar cases, would prefer a 5000 or 7500 but will also take a 10000 or 12500.

Loki 98mm cases do not match any other current manufactured cases . AMW had a 3.50" ID case . Loki is 3.55" ID . AT / CTI has a 3.675 ID . The old Kosdon 100 mm cases also had a 3.675" ID . Please anybody correct me if my memory is incorrect .

Eric

 

[DannyB]

Thanks for that Eric, I appreciate it. I'll have to update the thread title.

 

[rocketsaway]

Loki is 3.50" ID. AMW had a 3.55" ID case .
Loki were considered "standard" cases. 3-1/2"
Loki stopped 98 cases (pre Scott K.) Some were made w/ threaded ends, most snap ring and used no external thrust ring. They were about .020" or so OOR.
AMW 98 3.55 are specified drawn cases. About .002"-.005" OOR. The nozzle and closure liner shoulders are same OD as Loki. Hence, AMW 98 took thicker liners.
From what i knew 2-3yrs ago, AMW cases sold are either old stock or used. Any Loki 98 are used.
Trucore 98 cases were non anodized standard 3.50 cases had both machined shoulder thrust and external ring. About .005" OOR.

Good luck.

 

[jimzcatz]

The Loki case I have has a machined thrust ring/shoulder.