54mm FWCF tube 10/9/19

The Rocketry Forum

Help Support The Rocketry Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

REK

Well-Known Member
TRF Sponsor
Joined
Feb 21, 2012
Messages
3,090
Reaction score
109
Location
El Paso, Texas
Alright guys here is another 54mm filament wound tube. ID matches standard couplers for fiberglass or carbon.

The OD is slightly undersized at 2.26”. The overall length is 60”.

NOTE: This tube was made with WEST SYSTEMS epoxy, I have seen a lot of bad reviews and good reviews. The choice is yours and also coat it with UV stabalized clear gloss.

For right now the tube is slightly sanded. Once clear glossed it should look like the pictur below.

IMG_6467.JPG


I am asking $100 for it plus shipping.

PM me if interested, thank you.
 
I just noticed I didn’t post the weight, my apologies. I won’t know until I get home, but if I remember it was around 500 grams or so. Also yes it should be 60” usable length, the ends might be a little more on the OD as those were close to the taper that the end wraps make from the helical winds. Give or take 0.01” more. Still trying to eliminate that.
 
I am now a vendor, please have this thread moved to the vendors page.

Thank you
 
Back
Top