For Sale 54mm FWCF tube 10/9/19

Discussion in 'Yard Sale / Wanted' started by SinfulDarkLord, Oct 9, 2019.

Help Support The Rocketry Forum by donating:

  1. Oct 9, 2019 #1

    SinfulDarkLord

    SinfulDarkLord

    SinfulDarkLord

    Well-Known Member

    Joined:
    Feb 21, 2012
    Messages:
    2,570
    Likes Received:
    8
    Alright guys here is another 54mm filament wound tube. ID matches standard couplers for fiberglass or carbon.

    The OD is slightly undersized at 2.26”. The overall length is 60”.

    NOTE: This tube was made with WEST SYSTEMS epoxy, I have seen a lot of bad reviews and good reviews. The choice is yours and also coat it with UV stabalized clear gloss.

    For right now the tube is slightly sanded. Once clear glossed it should look like the pictur below.

    IMG_6467.JPG

    I am asking $100 for it plus shipping.

    PM me if interested, thank you.
     
  2. Oct 10, 2019 #2

    SinfulDarkLord

    SinfulDarkLord

    SinfulDarkLord

    Well-Known Member

    Joined:
    Feb 21, 2012
    Messages:
    2,570
    Likes Received:
    8
  3. Oct 15, 2019 at 2:52 AM #3

    SinfulDarkLord

    SinfulDarkLord

    SinfulDarkLord

    Well-Known Member

    Joined:
    Feb 21, 2012
    Messages:
    2,570
    Likes Received:
    8
  4. Oct 17, 2019 at 10:51 PM #4

    SinfulDarkLord

    SinfulDarkLord

    SinfulDarkLord

    Well-Known Member

    Joined:
    Feb 21, 2012
    Messages:
    2,570
    Likes Received:
    8
  5. Oct 17, 2019 at 11:04 PM #5

    3stoogesrocketry

    3stoogesrocketry

    3stoogesrocketry

    Well-Known Member

    Joined:
    Feb 26, 2012
    Messages:
    1,129
    Likes Received:
    61
    What's it weigh and is that a full 60 inches of usable length?

    Eric
     
  6. Oct 17, 2019 at 11:10 PM #6

    SinfulDarkLord

    SinfulDarkLord

    SinfulDarkLord

    Well-Known Member

    Joined:
    Feb 21, 2012
    Messages:
    2,570
    Likes Received:
    8
    I just noticed I didn’t post the weight, my apologies. I won’t know until I get home, but if I remember it was around 500 grams or so. Also yes it should be 60” usable length, the ends might be a little more on the OD as those were close to the taper that the end wraps make from the helical winds. Give or take 0.01” more. Still trying to eliminate that.
     
  7. Oct 18, 2019 at 5:32 AM #7

    SinfulDarkLord

    SinfulDarkLord

    SinfulDarkLord

    Well-Known Member

    Joined:
    Feb 21, 2012
    Messages:
    2,570
    Likes Received:
    8
    Apologies for not including the weight info, it is 492 grams.
     
  8. Oct 18, 2019 at 5:26 PM #8

    3stoogesrocketry

    3stoogesrocketry

    3stoogesrocketry

    Well-Known Member

    Joined:
    Feb 26, 2012
    Messages:
    1,129
    Likes Received:
    61

Share This Page