Martin Vrstal
Well-Known Member
- Joined
- Aug 3, 2002
- Messages
- 561
- Reaction score
- 0
I've been working on this for some time...my secret project. It's basically a 160% upscale of the Estes Pro Series kit.
The boat tail was made from poster board and glassed with 2 wraps of 4oz. The fins all cut out and beveled to shape. The NC is just temporary...I'm waiting for a different one to arrive. I still need more tube for the side conduit and also need to fab the smaller NC. The whole thing will be glassed...I hope..need more epoxy also. It's just pieced together now...I did that today just for a look see.
So here it is...4" dia by about 48" tall.
38mm, and I'm not sure what it will fly on as of right now.
Enjoy
The boat tail was made from poster board and glassed with 2 wraps of 4oz. The fins all cut out and beveled to shape. The NC is just temporary...I'm waiting for a different one to arrive. I still need more tube for the side conduit and also need to fab the smaller NC. The whole thing will be glassed...I hope..need more epoxy also. It's just pieced together now...I did that today just for a look see.
So here it is...4" dia by about 48" tall.
38mm, and I'm not sure what it will fly on as of right now.
Enjoy