-->3D ROCKETRY<-- New "Nautilus III"

The Rocketry Forum

Help Support The Rocketry Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Slickwilly

Well-Known Member
Joined
Nov 29, 2009
Messages
619
Reaction score
5

Nautilus III full.jpg


IMG_0896.jpg IMG_0899.jpg Nautilus III Kit -3 final.jpgNautilus III Final.jpgNautilus III Final fins close.jpg

27-1/2” Long kit comes with:
LOC 9-1/2” ogive plastic nose cone
LOC 2.26” dia. 17” long heavy fiber airframe tube
LOC 5-1/2” 29mm motor mount tube
(6) 1/8” thick birch plywood fins (Thru the wall rear fins)
(2) 1/4” thick plywood centering rings
(6) 1/8"x1/8" basswood fin trim
1/4” launch lugs
No slots!
Slot cutting and fin alignment template included.
Instruction booklet.
Can use larger 24mm motors (With adapter) and 29mm single use and reloadable motors.
Over 400 ft. with an Estes D12-4 (24mm motor)
Estimated weight 10 oz.
Predicted altitudes up to 3,700 feet!!

18" Nylon chutes and Small rail buttons now available in Parts Store!!
 

Attachments

  • IMG_0901.jpg
    IMG_0901.jpg
    27.4 KB · Views: 139
Last edited:
Back
Top