bill2654
Well-Known Member
- Joined
- Sep 1, 2010
- Messages
- 2,542
- Reaction score
- 14
Heres an idea I came up with for an easy and inexpensive (less than $2)motor retainer. This works great on 38mm where you have at least 3/8" motor mount exposed. I made it from a 1-1/2" theaded PVC adapter. The one in the pic is for electrical applications but they are identical. I used a 1' abrasive wheel but a dremel will work also. Take out enough of the inside of the PVC adapter so it fits over your motor mount and then cut off 3/8" to 1/2" of the threads. JB weld the threads onto your motor mount. I used a 1-1/2 by 1-1/4" threaded nut on the end of the threads. Easy, fast, inexpensive and doesn't look half bad! Bill