38/600 aerotech adapters

[viciouspeanut]

Hey everyone,

Question about the adapters for the RMS systems. I know the 600nm case has a different forward seal disk but can you use one or two spacers and drop it down to the lower case that does not have the disk?

 

[CzTeacherMan]

Hey everyone,

Question about the adapters for the RMS systems. I know the 600nm case has a different forward seal disk but can you use one or two spacers and drop it down to the lower case that does not have the disk?

Interesting question... Couldn't you just use the seal disk on the smaller reload anyway?

 

[Steve Shannon]

Interesting question... Couldn't you just use the seal disk on the smaller reload anyway?

I always thought the seal disk is for the reloads with the phenolic liners and the shorter reloads use the cardboard liners.

 

[woferry]

The seal disk depends on the load, not the case size. Most (if not all) of the longer 38mm loads do tend to call for the seal disk, so it gets included with the longer complete motors (but if you just buy the case alone you might need to buy it separately). But if the motor instructions say it needs a seal disk that's regardless of the case size or spacers involved, and similarly if the instructions don't require a seal disk then you don't use one even when using the RAS spacers in a longer case.

 

[jimzcatz]

He is right. Paper liners no disk.

 

[viciouspeanut]

Excellent - thank you for clearing that up!