29mm Minimum Diameter Onboard Camera

[CoyoteNumber2]

Just wondering what you guys have used for this setup. (And I mean cameras mounted internally - not taped to the outside.)

 

[ksaves2]

I'm not sure if there is a camera small enough to look out from inside. If there is, I'd like to see what it is. I've seen some of these old pen cameras https://www.ebay.com/sch/i.html?_nkw=Pen camera&ssPageName=GSTL but one would
have to mount it inside of a long bay securely even if you take the pen part off. If it gets jostled, might lose sight of the viewing port out of the rocket. Kurt

 

[CORZERO]

I have a few of these laying around in a box somewhere waiting for a small diameter project:

https://www.bhphotovideo.com/bnh/co...ap=y&m=Y&c3api=1876,91438732682,&Q=&A=details

It's a replacement board for this little guy:

https://www.monoprice.com/product?p_id=13993

There are videos on youtube for you to see the resolution (720x240)

A little 3.7v Lipo will take care of power.

0.71 inches wide, 1.34 inches long or something. Specs are out there somewhere.

 

[CoyoteNumber2]

I have a few of these laying around in a box somewhere waiting for a small diameter project:

https://www.bhphotovideo.com/bnh/co...ap=y&m=Y&c3api=1876,91438732682,&Q=&A=details

It's a replacement board for this little guy:

https://www.monoprice.com/product?p_id=13993

There are videos on youtube for you to see the resolution (720x240)

A little 3.7v Lipo will take care of power.

0.71 inches wide, 1.34 inches long or something. Specs are out there somewhere.

Good intel, thanks.