- Joined
- Jan 30, 2016
- Messages
- 8,993
- Reaction score
- 3,518
There, that title ought to be :hot: inflammatory :hot: enough.
The 29/40-120 delay sequences had been nagging at the back of my mind for a while, and this weekend it all finally lined up.
As far as I know, this should be all of the reload and delay options ever offered for this case. g33 & g71 are OOP, and g138 requires an L1 cert in the US.
It seems apparent that a g76 with an hdk20 would be about an 11 sec delay ; hdkXX could be drilled from hdk21 ( 13-14ish? ) , hdkYY and hdkZZ from hdk22.
Hope this helps someone out! Remember that changing out the delay element makes it an EX load, but drilling per manufacturer's recommendations does not.
I wouldn't be surprised to see AT offering fewer HDKs in the near future, and further emphasizing the DDT.
Bonus: if you're using electronic deployment, the hdk22 and especially hdk23 should put out tracking smoke for a lot longer ; may hibachi the forward closure and/or other components though.
15 | 16 | 24 | 25 | 17 | 18 | 19 | 20 | XX | 21 | YY | ZZ | 22 | 23 | ||
E16W | 2.0 | 4 | 7 | ||||||||||||
E23T | 1.6 | 5 | 8 | ||||||||||||
F22J | 3.3 | 5 | 7 | ||||||||||||
F40W | 2.1 | 4 | 7 | 10 | |||||||||||
F52T | 1.4 | 5 | 8 | 11 | |||||||||||
G33J | 4.4 | 5 | 7 | ||||||||||||
G53FJ | 1.7 | 5 | 7 | 10 | |||||||||||
G64W | 2.1 | 4 | 7 | 10 | |||||||||||
G71R | 1.5 | 4 | 7 | 10 | |||||||||||
G76G | 1.5 | 4 | 7 | 10 | |||||||||||
G138T | 1.1 | 14 | |||||||||||||
0.375 | 0.406 | 0.438 | 0.469 | 0.500 | 0.531 | 0.562 | 0.593 | 0.625 | 0.657 | 0.688 | 0.719 | 0.750 | s.750 |
The 29/40-120 delay sequences had been nagging at the back of my mind for a while, and this weekend it all finally lined up.
As far as I know, this should be all of the reload and delay options ever offered for this case. g33 & g71 are OOP, and g138 requires an L1 cert in the US.
It seems apparent that a g76 with an hdk20 would be about an 11 sec delay ; hdkXX could be drilled from hdk21 ( 13-14ish? ) , hdkYY and hdkZZ from hdk22.
Hope this helps someone out! Remember that changing out the delay element makes it an EX load, but drilling per manufacturer's recommendations does not.
I wouldn't be surprised to see AT offering fewer HDKs in the near future, and further emphasizing the DDT.
Bonus: if you're using electronic deployment, the hdk22 and especially hdk23 should put out tracking smoke for a lot longer ; may hibachi the forward closure and/or other components though.
Last edited: