Neutronium95
Well-Known Member
- Joined
- Jan 17, 2010
- Messages
- 1,079
- Reaction score
- 1,570
At my launch site, there is a challenge to hit 20,000 feet, but not break the wiaver of 25,000 feet. All of the other atempts have been single stage M motors. I plan to do it with a two stage 29mm rocket with two CTI I224 s. The body tubes will be carbon wrapped Apogee tubes that are saturated in epoxy. Fins will be .0625" G10, and nose will be a composite Von Karmen design. (In the simulations it is a cone to get a more accurate sim).Electronics will be a Raven and a beeline.
Now for the hard parts https://www.nar.org/hpcert/jrhppreq.html
scroll down to section 5.
I'm not allowed to use electronic deployment, or possabley staging.
To deal with these issues, I just might have to put my dad's name on the flight card.
Also, I want some tips on making the nose cone, I was thinking about making it on a foam male mold, then using acetone to dissolve the foam.
Any input is welcome
View attachment 20k.rkt
Now for the hard parts https://www.nar.org/hpcert/jrhppreq.html
scroll down to section 5.
I'm not allowed to use electronic deployment, or possabley staging.
To deal with these issues, I just might have to put my dad's name on the flight card.
Also, I want some tips on making the nose cone, I was thinking about making it on a foam male mold, then using acetone to dissolve the foam.
Any input is welcome
View attachment 20k.rkt
Last edited: