Are you twisting your ignitors together in series or parallel ?
Was this the motor case ever pressure tested ? I know you where on the fence about it .
Helps when you hit send , innound
What's it weigh and is that a full 60 inches of usable length?
That's a proline / performance rocketry kit . I have the same one , but with a 75mm mount . Your looks 100 times matter then mine though lol
Look into Loki Reaserch . You will not be sorry .
I flew one once on a SU Aerotech J100 WL. It held durring boost , never saw it eject or float away .
Grain / seal disk / floating clouser / spacer / spacer/ retaining ring
Roughly 1280ns per grain.
Did he give you retail price for the trade in , or his price? I've traded motors in before to dealers and only received the dealers price , not...
Can you fill us in on exactly what your referring to? Some people may have this load as a first timer and not know what to look for. Thank you
Any details on the R rocket that wound up 16 feet under ?
If you need low and slow , call pml and get a 11.5 inch cone , and 2 48 inch long tubes. Build it just like a standard rocket. Coupler in the...
Kevin , I will take the 2 29mm spacers .
Mach 1 Rocketry . Their 3 inch thin wall fiberglass kits are awsome on 29mm motors .
Yes EMT. My auto correct felt EDM was the better choice lol .
I have a tower made put of .75 EDM tubing and half inch Baltic birch . It's made for up to a 4 inch rocket. Cost is under 100 total . I built it...
Yup . Here's a old school trick. Find a place you can drive it up to around 45mph on grass , and hit the brakes hard. You need to breaks to lock...
Separate names with a comma.