Hey Marten. I've got your twin!
And yes there's a bit of a theme about my paint jobs.
#14 arrived in ROW today!
I really liked the Lunch Lugs. They were yummy!! :D
The Apogee Apprentice is a dead easy build and a lot of fun to fly for a newbie. Takes A, B and C motors...
And there's always this.......
Reserve x 1 + 38mm upgrade please (ROW)
Originally got the bug when over in Lexington, MA circa 1970. Dad was doing a sabbatical at Harvard while I did 2nd year high school. Bought some...
Sorry. This has been bugging me for a while. Got my feet 'n inches messed up. Should have read 4 x 8' lengths. Wouldn't want anyone to go off half...
Very interested. PM sent.
I recently purchased an old stock G-Force (Instruction date stamp 2001!) which I plan on bashing out to a 38mm mmt and using a piston in the...
Now where have I seen that before? :-)
Yeah the instructions came with the kit but not the parts.
You'll need 3/8" dowel (about 4 x 4' lengths), HD cardstock, 0.050-0.075" wire and a...
The Nell is a top little kit to both build and fly!
I reckon the Double Shot is an excellent kit for a first HP 2 stage attempt.
I'm just checking here but are you using separate charges for each altimeter? You'll have a total of 4 charges (1 x drogue and 1 x main) for each...
My guess would be a digital thermostat for either the bed or print head. Suggest the bed as it is set for 91?
(Ancient fridgy talking here!)
Beat me to it, Rich.
Ejection delay too short causing the recovery gear to be deployed while the craft is still cruising to apogee. Shroud lines...
Well the mini gps is a bit of a rebalance act. Sounds like you might want to get a hold of Open Rocket or Rocksim and run some tests. They're very...
I built a modified Comanche to take E12-0's to an E12-6. Simmed to 4500 but only got 1800 due to weathercocking. Pays to make several of the 2nd...
Separate names with a comma.