Siya yes I can make bigger mandrels. But at this time I am only making mandrels for 10/13/18mm these are the most common size motors for the...
Here are a few more photos:
No , 4” tube will not work according to the original the max tube size is 3”.
Here is the original listing:...
Are you looking for just a single 24mm mandrel?
Good news they will not be 800 pounds!
I will be selling them complete with 3 mandrels 10mm,13mm, And 18mm for $400 (£319.28)
I will try to...
Thanks , the pictures Steve took are of the prototype i still have to finish a few more items on it. But that’s basically it.
I’ll be at naram only for the north coast cup and team selection .my son is trying out for the jr team again.
I tried to stay as close to the...
Getting closer to being completed , hopeing to have a few at naram in a couple weeks.
I posted pictures showing that I started... I work on them when I get time.
Here’s a pic from liftoff .
We angled it out that way ... away from the “lake?” And away from the flight line
The wocket only went to 1800ft
It was 3/16 tubing .125 id
I’m just happy it worked, now that I know it works I can try to fine tune things...
I used 4 - 1/8 injectors canted outwards .
The 15 seconds was burn time during liquid phase , using the time on the video from first motion...
Yes tube id was 2.75
Nozzle /nozzle washer - 1.68” long
Injector is 1.230” long
Fwd bulkhead is 1”.170 recessed the vent tube fitting to get...
Any one here good at using Todd Moore’s hdas spreadsheet ? Or know of a different simulation tool?
I would like to try to reverse sim a motor...
We will be at Michigan international speedway graves campground July 13th
I Use him all the time , will see him tomorrow ...
Mostly loki not much cti left.
I don’t think he ships motors. But I only buy onsite so don’t...
the original said it was only good for airframes up to 3” . The problem is the plate the fin lays on can only be moved so far away from the...
Separate names with a comma.