This was just discussed in another thread,
It was a motor available 30 years ago.
Made by Vulcan Systems.
At least one part of the project is well designed, constructed, tested and reliable.
if you use a standard closure with ejection (even with no powder and grease) it will burn through while the motor is under pressure and your...
Was that a hybrid I just heard launch?
Mighty dry out there.
Drink more water.
Back in the 90's a remote firing system was sold for rockets. I can't recall the name right now.
A local flyer used it for lighting second stages.
Thank you Bob.
How are the field conditions with the rains Kansas/Oklahoma has received?
I have been there and it seems to be reasonably high ground for Kansas.
With low humidity static can be a problem with electronics, matches and powders. We have had problems at Black Rock with this.
Be safe. Have fun....
I would take a sample of tubing, weigh it, prime and paint, then rewiegh .
Is the reduced drag of a smooth finish giving enough altitude to...
We were tearing down the BALLS launch in a dust storm a couple years ago.
I noticed 9 out of the 12 people were TRA life members.
Congrats on the record
I was trying to set it way back when cardboard airframe tube was all we had and AT I132 were the motor to use. We thought...
Does the sustainer have a large enough parachute that it is recovered without damage to the motor?
Was launched before Class 3 and individual waivers.
Imbedded about half way in the ground 5 miles north. Airframe was mostly carbon so it disintegrated on impact.
The person (shall be nameless) who...
I remember this.
My father had a subscription to this magazine and I read it as a kid.
My brother has it and other model airplane magazines going...
I should have written "I had nothing to do with the airframe."
Nose weight or larger fins and this would have been just another P motor flight at...
I made that motor. It worked great!
Nothing to do with airframe.
Separate names with a comma.