The X-15 flew again today at the SARA launch. We were able to catch some pretty cool stills of the flight.
I flipped this on on its side...just...
North Coast Rocketry has a 2.6" Hobgoblin.
I've taken minimum diameter rockets with balsa fins supersonic on a few occasions without issue.
That looks amazing! How much weight do you think the fiberglass adds to it?
Mega Der Red Max
She flew Saturday on a F23FJ. Nice flight, but it broke the rubber band on my ChuteRelease and it took a while to come down. Luckily there wasn’t...
This little guy only weighs 4.9 oz, and only has 5" of body tube that isn't re-enforced by either the motor mount or the nose cone shoulder. Even...
They are through the wall. Glued to the motor mount with titebond 2
With Halloween coming up, I thought it would be the perfect time to build another Goblin or two. But since I can’t leave well enough alone, I...
[ATTACH] Built a clone of the Estes Argent. Fitted it with a 38mm motor mount and a baffle in the coupler.
It flew today on a CTI G50IM-8. OR...
[ATTACH] Just finished this one for my youngest. 2.6” Der Pink Max!
My 4" AMW FiberMax and my daughters 4" scratch built "Der Jedi"[ATTACH] [ATTACH]
I put an 18” parachute in it. Which slowed it’s decent rate to about 15fps. Just a little dirt on the dorsal fin.
She flew today on a D12-5. My calibrated eye determined it got pretty close to the OR simulated 900’.
Flew today. Not quite straight up. Probably due to some wind and rod whip.
A few years ago when my daughter got me hooked on rockets again, I built an Estes Big Daddy to fly with her at the park.
[ATTACH] [ATTACH] [ATTACH] [ATTACH]
Finally got off of my butt and got this thing finished!
Big shout out to Mark Hayes at stickershock23.com...
[ATTACH] 3 coats of satin black and 2 coats of satin clear.
Had to move into the kitchen for better light. Haha
[ATTACH] More primer. Using different colors of primer so I can see how much I’ve sanded off.
Separate names with a comma.