Clearing the workbench - everything must go

First up are some PML centering rings and bulkheads. They are 98mm diameter with a 38mm hole. I have 5x centering rings, 2x coupler bulkheads, and 2x airframe bulkheads. Everything is quality 3/16" plywood. Id like to get $20 shipped. Gone.

Second are some 7.5" to 98mm centering rings and bulkheads. 4x rings fit into an airframe, and 1x fits into a coupler. 1x bulkhead is sanded for a recovery harness, and 1x is not. Everything is made form 1/2" plywood. Id like $30 shipped. Gone.

Also have some 54mm to 38mm centering rings from Apogee. WIll fit near anything with some sanding. Two in each package. $3 shipped. Gone.

Next are 4x Rocketry Warehouse 54mm 5:1 fiberglass nosecones. Each cone has a hole drilled into the shoulder where I intended for screws to go and hold in a bulkplate. Still perfectly usable. Would prefer $15 plus shipping. Gone.

To go with the nosecones, I have the bulkheads that fit into them. They are 1/2" plywood and have 2x holes where screws (or shear pins) go through to hold it to the cone. I am sure with some sanding they would fit a 54mm coupler just as fine. Free with a nosecone. $1 shipped separately. Gone.

I also have some 1/16" x 1.25" x 9" fiberglass strips. They can still be used as AV Sleds, or something totally different. All up to you. Free with a nosecone. $1 shipped separately. Gone.

Then there are a ton of 38mm motor tubes. 4x of the tubes are 12" long, and 1x tube is 15" long. Each would be fine for a motor mount, fincan, payload bay, etc. All ends are smooth. Make me an offer on these, because I have no idea what it would cost to ship. Low-ballers ignored. Gone.

Lastly,and definitely least, are the 54mm blue tubes. Each tube is 24" long and strong as hell. The bottom 5.5" have 4x 1/8" wide slots. That still leaves you with almost 18" of untouched tube. Perfect for a payload bay, motor tube, or whatever you want them for. If you want, I can cut the tubes to length for you. Make me an offer on these, because I have no idea what it would cost to ship. Low-ballers ignored. Gone.



If you are reading this and are one of the people who ordered a Shoot For The Cure 2.0 rocket, I am sincerely sorry. I did everything I could and got so close, but life really just is hell right now. Grades, cars, extracurricular activities, and just being a teenager have put things on hold lately. I am sorry that these could not get finished, and sorry I couldn't keep the promise I made to you and to myself to follow through.

PM sent.

Mason-up for the 98mm stuff. PM me, please! thx- dave
+ 1 54mm cone!

Let me know about pm

Still have:
2x bulkheads
2x fiberglass strips
2x packages of rings
2x blue tubes
The 7.5" rings

Mason- 2 packs of the 54/38 rings if ya got 'em! PM'd-thx!

Lists are all up to date.

Excellent, my friend! Thx for the really quick responses! -dave
(BTW- you got money!)

PM sent on the 38/54 rings and the last 2 blue tubes

Update.

For those of you wondering why you havent received boxes, or even tracking numbers, you will shortly. PSAT's were this week, so I have had less time than usual to goof off, and that was taken up by looking for a car. With the testing over and a car bought, the boxes should be out the door asap. Im going to register the car on Tuesday, so the boxes will be dropped off by Wednesday if all goes to plan.


Its a 2002 Chevy Malibu with a 3.8: V6 engine. Tranny was rebuilt within the last 100k and there are two new, spare tires in the trunk. All for $1600

Everything has shipped but your stuff, Dave. I went to the post office and picked up a Flat rate box just for you, buddy.

MasonH said:

Everything has shipped but your stuff, Dave. I went to the post office and picked up a Flat rate box just for you, buddy.

Click to expand...

You sir, are truly a steely-eyed missile man! Nice car! Drive safe buddy! Hope your PSAT's went well.

Received my order today. Everything looks good. Thanks!

Got my two nosecones thanks!