stratos283
Well-Known Member
- Joined
- May 10, 2010
- Messages
- 115
- Reaction score
- 0
Thanks to Fishead for the extra set of decals, all four "sides" of my Big Daddy have a sufficient number of decals. It may seem like overkill, but I managed to use them all and I'm fairly pleased with the results.
Now, the only remaining step is the clear protective coat. I used Krylon True Blue Gloss 51910 lacquer enamel as the topcoat, and have a can of Krylon Crystal Clear Acrylic Gloss 51301 that I am a bit afraid to use because I'm not sure of the compatibility.
So, do I spray this on, try to find some clear that is labeled lacquer enamel as well, or go the Pledge with Future route? I'd really like to use this Krylon 51301 as it's a new can, but don't want to "melt" the whole deal by using something that's not compatible with my blue/decals. Any and all opinions are greatly appreciated.
Stratos283
Now, the only remaining step is the clear protective coat. I used Krylon True Blue Gloss 51910 lacquer enamel as the topcoat, and have a can of Krylon Crystal Clear Acrylic Gloss 51301 that I am a bit afraid to use because I'm not sure of the compatibility.
So, do I spray this on, try to find some clear that is labeled lacquer enamel as well, or go the Pledge with Future route? I'd really like to use this Krylon 51301 as it's a new can, but don't want to "melt" the whole deal by using something that's not compatible with my blue/decals. Any and all opinions are greatly appreciated.
Stratos283