SammyD
Well-Known Member
For sale is an odd lot of building components that I can't bring myself to toss in the recycle bin, figuring that someone out there could likely use some or all of this. Here's what's included:
NOTE: I'm following the first photo shown below for the descriptions
Back Row L to R:
The two smallest white items on the back row left standing on end are couplers that fit a 1.8" airframe; one is 2.5" long, the other is 4" long.
Beside those (also white) are two Aerotech 2.6" couplers that are 6" long.
Next to those to the right in the photo standing up (brown paper) is a LOC 3" Coupler (6" long) with a coupler stiffener already epoxied in. I used the coupler bulkplates for something else.
Next to that to the right is another 6" coupler that's been butchered a bit with trials of a Forstner bit. To the right of that is a 3" coupler section that is 8" long. The last item standing up is a 5" long airframe stiffener/coupler for 2.6" airframes.
Lying in front of the couplers is a BlueTube 38mm airframe/motor mount that is 15.25" long and immediately in front of that is a 38mm coupler that is 7.75" long.
Lying in front of the BlueTube are sections L to R are a section of 1.8" airframe that is 4" long (I made a 1.8" rocket with an AV Bay that used the couplers shown at the start of this description along with the balance of this airframe piece). Next to that small piece are four pieces of LOC paper in 2.6" diameter, 5.5", 2.5", 4.75" and 4.125". To the right of those are two sections of LOC 54mm motor mount; this is the thick, heavy LOC paper designed to be used as motor mounts, though I did build a super-strong 2.25" rocket from this motor tube Lengths of the 54mm paper are 8" and 15.75".
Finally, in front of all the paper is a set of used strakes from the Aerotech StrongArm model rocket. Something happened to the rocket, but I took the strakes off to use on a future scratch-build that never happened...
$35 shipped to the USA. Paypal Friends and Family ONLY please. Thank you.
NOTE: I'm following the first photo shown below for the descriptions
Back Row L to R:
The two smallest white items on the back row left standing on end are couplers that fit a 1.8" airframe; one is 2.5" long, the other is 4" long.
Beside those (also white) are two Aerotech 2.6" couplers that are 6" long.
Next to those to the right in the photo standing up (brown paper) is a LOC 3" Coupler (6" long) with a coupler stiffener already epoxied in. I used the coupler bulkplates for something else.
Next to that to the right is another 6" coupler that's been butchered a bit with trials of a Forstner bit. To the right of that is a 3" coupler section that is 8" long. The last item standing up is a 5" long airframe stiffener/coupler for 2.6" airframes.
Lying in front of the couplers is a BlueTube 38mm airframe/motor mount that is 15.25" long and immediately in front of that is a 38mm coupler that is 7.75" long.
Lying in front of the BlueTube are sections L to R are a section of 1.8" airframe that is 4" long (I made a 1.8" rocket with an AV Bay that used the couplers shown at the start of this description along with the balance of this airframe piece). Next to that small piece are four pieces of LOC paper in 2.6" diameter, 5.5", 2.5", 4.75" and 4.125". To the right of those are two sections of LOC 54mm motor mount; this is the thick, heavy LOC paper designed to be used as motor mounts, though I did build a super-strong 2.25" rocket from this motor tube Lengths of the 54mm paper are 8" and 15.75".
Finally, in front of all the paper is a set of used strakes from the Aerotech StrongArm model rocket. Something happened to the rocket, but I took the strakes off to use on a future scratch-build that never happened...
$35 shipped to the USA. Paypal Friends and Family ONLY please. Thank you.
Last edited: