• If you have bought, sold or gained information from our Classifieds, please donate to Rocketry Forum and give back.

    You can become a Supporting Member which comes with a decal or just click here to donate.

Found The Estes Star Rider/Nemesis Nosecone (PN 071005)

The Rocketry Forum

Help Support The Rocketry Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

K'Tesh

.....OpenRocket's ..... "Chuck Norris"
TRF Supporter
Joined
Mar 27, 2013
Messages
22,536
Reaction score
14,946
I've been sent this image, and while it looks like a PNC-50S, I've never seen one that shows a canopy in any of the images I've seen of the SST or the Sandpiper. Does anyone recognize it?

PNC-50S with canopy.png
 
Last edited:
Thanks for the link RH... My lack of sleep work addled mind completely forgot about that thread.

Can you see the image now?

upload_2019-12-30_2-45-3.png
 
It was used in the 2010 Star Rider and 2175 Nemesis. Not to be confused with the PNC-50CA which used the same part #.
https://www.spacemodeling.org/jimz/est2010.htm

PS FWIW the 2175 Nemesis:
jonrocket-estes-nemesis-2157.jpg
 
Last edited:
The excessive flashing and closed loop seems to indicate that his is not an original blow molded part.
More likely a cast reproduction. Moldin' Oldies does not have this in their current line-up, but perhaps they did at one time?
 
And we have our answer. A PN 071005. Don't think I've ever seen that before. Thanks for the link!

Thanks Kuririn
 
IMG_7660.jpgIMG_7661.jpgIMG_7659.jpg

I can’t say it is or is not casted. It came with these is same lot. They appear original.
 
Correct as in casted or correct as in original?
 
This also appeared in the Mega Maxx 1474 Starter Set on the Spitfire SSI.
 

Latest posts

Back
Top