PML 4inch Amraam ?

I was told PML has an area on their sight that explains converting this particular kit to traditional dual deploy if it was built per the original kit specs - for the life of me I cant find the area that says where to cut what . I pretty much know what I want to do with it - but there is also supposed to be the altimeter bay kit ect . and if they have another way to skin a cat - Im glad to listen.
What am I missing ????

https://publicmissiles.com/kits/cprbasedkits
https://publicmissiles.com/kits/components.asp?groupid=26
https://publicmissiles.com/images/CPRretro_fitinstructionbooklet.pdf
https://publicmissiles.com/images/3KRetroCutDrawing.pdf

Links above are exactly what you need. It's a GREAT kit. Not mid-power tho. Lowest mine has seen is an H242T.

Very nice!

You don't need to cut anything, just build DD as is. Mine I put altimeters in the coupler, business as usual. Removable by using their plastic rivets.
The CPR system is too limiting IMO must use their altimeter and the screw on caps way too small to be effective holding sections together. I have personally seen them fail.

The altimeter is a standard Missleworks RRC3 [69.00] modified to fit sled holding CPR together they bump it up to 125.00. They are identical.

I just did standard.

kuririn said:

https://publicmissiles.com/kits/cprbasedkits
https://publicmissiles.com/kits/components.asp?groupid=26
https://publicmissiles.com/images/CPRretro_fitinstructionbooklet.pdf
https://publicmissiles.com/images/3KRetroCutDrawing.pdf

Click to expand...

Thats what I was after - Just confirms what I knew - but I wanted to see it . Thanks kuririn .

blackjack2564- Had it not already been glued in place- I guess I could have done that , but I would just rather add my own bay I can pull back and forth between 2 other rockets that share the same av bay size diameter. Trying to lower some costs , no sense in 5 altimeters when 2 will get it done by simply changing over the av bay
I could care less if the switch band color matches