Details:
There are some unique build features in this kit.
2 paper clips and a safety pin are included.
The ends of the paper clip are cut off and glued into dimples in the fin can.
These launch guides replace the traditional launch lug.
The safety pin is cut and formed into a hook for the shock cord.
It also serves to act as a thrust ring for the motor.
The scale fins occlude the opening from the bottom.
So the motor must be loaded from the top of the can.
Therefore the body tube is not glued to the fin can.
The can is taped to the body tube at launch.
When I ordered the bt-19 tube from erockets I ordered a second one with a balsa bt-19 Mercury capsule nose cone.
Here's a dry fit side by side.
Will do a scratcher MR from traditional balsa/paper alongside the Boyce 3D model.
Here's the same capsule for an 18mm build about five years ago.
Thin strips cut from electrical tape simulate the trusswork.
The body wrap vinyl decal looks awesome.
Will scan and print on decal paper for the scratcher.
BTW got an email yesterday. The 1/100 Boyce Mercury Atlas is out!
https://boyceaerospacehobbies.com/p...lders-kit?mc_cid=67f0534caf&mc_eid=7ff7bfaf55
Laters.