So I'm dusting off my plan to upscale the Screamin Green Meenie after several years on hiatus. Assuming I can still find all of the parts I had squirreled away. The original plan was to do everything with LOC parts or equivalent.
I'm planning to scrap my original idea of a 29mm MMT for a 54mm MMT, and adapt down to 38 if needed. However, I'm now thinking that I'd feel a lot more comfortable if the tube fins were fiberglass instead of cardboard. With 3/4 lb of nose weight, I _should_ be able to fly this on a J315.
And yes, I could go to Madcow or one of the other vendors and pay for some fiberglass tubing, cut to order. I may still do so. First, I wanted to see if anyone had a scrap piece of tubing, or even coupler, laying around.
Willing to offer a reasonable amount of $, plus shipping, or some trade involving something from my "unfinished projects" pile. Looks like I'm also going to be in the market for an AT 54 mm 852 casing too...
I'm planning to scrap my original idea of a 29mm MMT for a 54mm MMT, and adapt down to 38 if needed. However, I'm now thinking that I'd feel a lot more comfortable if the tube fins were fiberglass instead of cardboard. With 3/4 lb of nose weight, I _should_ be able to fly this on a J315.
And yes, I could go to Madcow or one of the other vendors and pay for some fiberglass tubing, cut to order. I may still do so. First, I wanted to see if anyone had a scrap piece of tubing, or even coupler, laying around.
Willing to offer a reasonable amount of $, plus shipping, or some trade involving something from my "unfinished projects" pile. Looks like I'm also going to be in the market for an AT 54 mm 852 casing too...