SammyD
Well-Known Member
I have a couple of built rockets that need to find a new home as I'm just not going to fly them. These will only be sold together unless you're interested in paying separate shipping.
1) Rocketry Warehouse Formula 75 (3") fiberglass kit with 38mm motor mount, FW fiberglass 5:1 nosecone, and 3/32" G10 fins. It also has dual 1/4" kevlar bonded to the motor mount, just like larger rockets. This rocket has been flown a number of times and shows the battle scars to prove it. If you'd like a great flying sport kit to fly single deployment without worrying that she's going to get a scratch here and there, this kit is for you.
2) Rocketry Warehouse Formula 98 (4") fiberglass kit with 54mm motor mount, FW fiberglass 5:1 nosecone, and 1/8" beveled G10 fins. This rocket has a modified AV Bay for dual-deployment: the AV bay itself is the same 8" length, but it has a bulkhead glued to the fore section and another buikhead made to fit well forward in the lower portion of the AV Bay. IT makes it tight in the bay itself, but allows you to get a 6XL case in this rocket, where a traditional build would only take a 5g motor. NOTE: one of the fins has a very slight warp to it that I tried to capture in a photo, correctable with some creative use of a hair dryer and clamp, or fly like it is with a little rotation on ascent. This rocket also has seen a number of flights and battle scars, but she's still got lots of flights in front of her.
$115 shipped for BOTH kits. Paypal Friends and Family ONLY please. Thank you! S
1) Rocketry Warehouse Formula 75 (3") fiberglass kit with 38mm motor mount, FW fiberglass 5:1 nosecone, and 3/32" G10 fins. It also has dual 1/4" kevlar bonded to the motor mount, just like larger rockets. This rocket has been flown a number of times and shows the battle scars to prove it. If you'd like a great flying sport kit to fly single deployment without worrying that she's going to get a scratch here and there, this kit is for you.
2) Rocketry Warehouse Formula 98 (4") fiberglass kit with 54mm motor mount, FW fiberglass 5:1 nosecone, and 1/8" beveled G10 fins. This rocket has a modified AV Bay for dual-deployment: the AV bay itself is the same 8" length, but it has a bulkhead glued to the fore section and another buikhead made to fit well forward in the lower portion of the AV Bay. IT makes it tight in the bay itself, but allows you to get a 6XL case in this rocket, where a traditional build would only take a 5g motor. NOTE: one of the fins has a very slight warp to it that I tried to capture in a photo, correctable with some creative use of a hair dryer and clamp, or fly like it is with a little rotation on ascent. This rocket also has seen a number of flights and battle scars, but she's still got lots of flights in front of her.
$115 shipped for BOTH kits. Paypal Friends and Family ONLY please. Thank you! S
