Interested!! With 38mm motor mouth please!
PM'd.
Interested!! With 38mm motor mouth please!
PM'dI will take one.
PM'dI’m in for 1 38mm upgrade please
Hi Brent, on this kit we are using LOC's PNC-3Are you using LOC nose cones?
If my math is correct, and there's not guarantee of that since I did take Real Number Theory in college, that make #20!
Any left? I’m in for one with 38mm upgrade please. I’ll PM the billing info.
Pictures aren’t showing up for me [emoji53]
Sorry about that, I will update specs to reflect the following:
Actual L=11.5in x 3in (292.1mm x 76.2mm) however its tangent reflects a 12in length. So its actually a custom hand blend of a 4:1 ogive tangent with a slight secant ogive profile, originally drawn in the late 90s. The blunter tip removes 0.5 inch (12.7mm) from the design length. So it is not a LD nor a LV - HAACK series nor even a VK.
Nose Length to shoulder 11.5 in. (292.1mm)
Diameter 3.0 in (76.2mm)
Overall NC Length 15 in. (381mm)
Shoulder Length 3.0 in. (76.2mm)
Custom 4:1 Tangent/Secant profiled Ogive.
Material Polypropylene blow molded, heavy duty.
Just curious about the NC - any drawings? The photo doesn't appear secant-ogive. 11.5" seems a bit short for a 3.1" OD tube, even accounting for a blunt tip.
No worries, being an OCD Cherokee-D guy, I'm just curious. A custom 2.6" NC that I had turned for my L1 Cherokee-D/H, cost as much as the rest of the parts put together!Hi dpower! I talked with Dave & Jason about PNC3 even before this project started. See previous post above. As stated before, It appears Ron drew as an tangent-Ogive 4:1 (aka 4 caliber) for 12" in the 90s, but it does not appear to be quite a ogive tangent 4:1 either. it has a slightly slimmer profile more like an secant-Ogive in appearance. Since there are no drawings, apparently when Ron drew the LOC PNC3 back in the 90s, it is believed that the molding company made a few changes to make the NC easier to remove from the molds, and to increase strength. As stated previously, the original drawings have been lost over the years. IMHO, its so close I was not going to develop a new NC to shave a few millimeters from the profile, but its clearly not either a tangent-ogive 4:1 nor a true secant-ogive either, and it surely isn't upscale BNC55AC clone, not sure what else I can say.
Would really like to see the photos. Unable to see any pics. iPad Pro 10.5”. What am I doing wrong?
Enter your email address to join: