CAD Software Enerjet 1340 Fin Can

Shop deals on ebay
the model rocket show
The Rocketry Forum

Help Support The Rocketry Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Jack Hydrazine

Jack Hydrazine

Well-Known Member
TRF Supporter
Joined
May 31, 2011
Messages
333
Reaction score
132
Enerjet-1340-Fin-Can-Pic.jpg


I 3D designed the fin can in order to make a launch lug that will fit over the one built into it to work with the 1340/20. It is a faithful reproduction you can download for free from Thingiverse and print. I have not printed it yet, but will in the future. Will fit any Centuri ST-13 and Estes BT-56 tubing. You can also scale it up or down to fit any other tubing. The following rockets used this fin can.

Enerjet 1340
Enerjet 1340/20
Centuri Phoenix Bird
Centuri Argus
Centuri MARS Project
Estes Longshot
Estes Maniac
Estes Challenger II
Estes Eliminator
Estes Eliminator XL

https://www.thingiverse.com/thing:3641770
 
I have created several other fin cans based on this design.

Enerjet 1340 Fin Can #2 (supersonic, FOUR FIN)
https://www.thingiverse.com/thing:3829871

Enerjet 1340 Fin Can #3 (supersonic, THREE FIN)
https://www.thingiverse.com/thing:3831483

Enerjet 1340 Fin Can #4 (original, THREE FIN)
https://www.thingiverse.com/thing:3834846

Enerjet 1340 Fin Can #5 (original, FIVE FIN)
https://www.thingiverse.com/thing:3837575

Enerjet 1340 Fin Can #6 (original, SIX FIN)
https://www.thingiverse.com/thing:3837581
 
Hi Jack - I just found this on Thingiverse and left a comment over there. This fin can was also used on the Estes Discovery 1440 Starter Set. It was my first rocket back in the day and I'm toying with the idea of cloning it. Thanks for the model!
 
Jack Hydrazine said:
Enerjet-1340-Fin-Can-Pic.jpg


I 3D designed the fin can in order to make a launch lug that will fit over the one built into it to work with the 1340/20. It is a faithful reproduction you can download for free from Thingiverse and print. I have not printed it yet, but will in the future. Will fit any Centuri ST-13 and Estes BT-56 tubing. You can also scale it up or down to fit any other tubing. The following rockets used this fin can.

Enerjet 1340
Enerjet 1340/20
Centuri Phoenix Bird
Centuri Argus
Centuri MARS Project
Estes Longshot
Estes Maniac
Estes Challenger II
Estes Eliminator
Estes Eliminator XL

https://www.thingiverse.com/thing:3641770
Click to expand...
Jack,
Just got around to flying my 1340 with your fin can printed in PETG slightly upscaled to fit my tubes and flew on a D12-3 no problems.
 

Similar threads

Doug Holverson
enerjet sounding rockets?
2
Replies
51
Views
4K
Ez2cDave
Ez2cDave
T
Is there or has there been an over-the-body tube BT-50 plastic fin can?
Replies
13
Views
1K
Buzzard
Buzzard
SolarYellow
3D Printing Temperature capability of resin prints and mechanical property tradeoffs (especially for fin cans)
Replies
2
Views
757
SolarYellow
SolarYellow
Jack Hydrazine
3D Printing Estes BNC-30D Nose Cone 3D Model
Replies
0
Views
531
Jack Hydrazine
Jack Hydrazine
Sooner Boomer
Yet another build thread for Dragon Rocketry's Fat Boy XL
2
Replies
35
Views
2K
Sooner Boomer
Sooner Boomer

Latest posts

Back
Top