Trying to downsize the fins from photos of the actual thing- looks like maybe 5/8" to 3/4" aircraft plywood would be close. Any recommendations as to who might produce these fins for me in plywood- sharp leading edges and all? Looks like the vanes(?) on the ends of the fins would have to be produced and attached to the fins separately.
I considered having the fins 3D printed with a 1/4" plywood frame inside, but decided against that method.
Mike Momenee
TRA #12430 L3
I considered having the fins 3D printed with a 1/4" plywood frame inside, but decided against that method.
Mike Momenee
TRA #12430 L3