Featherweight magnetic switch wiring problem.

The Rocketry Forum

Help Support The Rocketry Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

captbk

Well-Known Member
Joined
Feb 3, 2017
Messages
395
Reaction score
99
Location
Monkey Island
I have a MissleWorks TRS/GPS trackeing system and I just purchased the featherweight switch and the instructions on the website are for a straight forward altimeter hookup, but my Missleworks has a terminal block for +-Batt and another +- space for a switch. Im confused on how to wire up this Featherweight magnetic switch to my MisslelWorks TRS/GPS. Help??
 
You just need to wire the Fetherweight magnetic switch to the battery input of the Missileworks device. Then add a jumper to the switch inputs so that circuit is always on.
My jumper is the orange wire of the RRC3 in this pic, the red and black go to a switch inline with my battery:
IMG_1920.JPG
 
Thanks for the pic but Im still lost. The odd number of connections on the switch got me baffled. In, out, and ground?? Im assuming that the in and out channels are both positive?
 
I have a MissleWorks TRS/GPS trackeing system and I just purchased the featherweight switch and the instructions on the website are for a straight forward altimeter hookup, but my Missleworks has a terminal block for +-Batt and another +- space for a switch. Im confused on how to wire up this Featherweight magnetic switch to my MisslelWorks TRS/GPS. Help??

This has been answered at least a dozen times so here is a quick link to one thread. Type "featherweight magnetic switch wiring" as a search and you will get a good number of hits.

https://www.rocketryforum.com/threa...-magnetic-switch-to-an-eggtimer-quark.142947/
 
Thanks Michael, I dont know why but I didnt even think about the search button before crying for help.
 
Back
Top