New certified motors CTI February 2010-RSE and ENG files

[Menkar]

Good evening,

sorry I was late to publish but here are the latest CTI update. As usual there is a set with only the new motors and a set with all CTI motors.


Then new N10000 is in there :jaw:

André


PS: the "all motors" rse file is too big so I had to compress it.

View attachment CTI_Feb2010_All.eng

View attachment CTI_Feb2010_Update.eng

View attachment CTI_Feb2010_All.zip

View attachment CTI_Feb2010_Update.rse

 

[Pantherjon]

Thanks Andre!

 

[JDcluster]

Thanks for the update!

I do have problems loading them into WRASP.
Who ever formats them for .eng files has the delays wrong.
You have to start with the lowest to highest delays.
I find them listed 9-12-14-3-5-7 which doesn't work.

I'll post the reworked file once I get all of the motors working...



JD

 

[Menkar]

Thanks for the update!

I do have problems loading them into WRASP.
Who ever formats them for .eng files has the delays wrong.
You have to start with the lowest to highest delays.
I find them listed 9-12-14-3-5-7 which doesn't work.

I'll post the reworked file once I get all of the motors working...



JD

I used to put them in descending order, I'll fix my files. So for the next CTI certification session they'll be ok.

I don't use WRASP, so didn't know ! First time I heard that. :confused2:

André

 

[JDcluster]

Here's a file with the new additions & a few older motors.



JD

View attachment 1ALL.eng

 

[Menkar]

Here is a set with all the motors (some were missing) and I also fixed the delays. Please note that I left motors with more than 10 different delays. As I said earlier I don't have wRASP and can't test it.

Please let me know if the extra delays really bug wRASP.

André

View attachment CTI_Feb2010v2_All.zip

 

[Handeman]

Here is a set with all the motors (some were missing) and I also fixed the delays. Please note that I left motors with more than 10 different delays. As I said earlier I don't have wRASP and can't test it.

Please let me know if the extra delays really bug wRASP.

André

WRASP32 fails with a Subscript out of Range error when trying to load the .eng file.


[edit] I did some testing and anything more the 6 delay times causes the Subscript out of Range error.

 

[Menkar]

WRASP32 fails with a Subscript out of Range error when trying to load the .eng file.


[edit] I did some testing and anything more the 6 delay times causes the Subscript out of Range error.

Thanks for the info. I'll try to see if it's feasible to have 2 versions of the eng file.

I'll post a new version later tonight.

André

 

[Menkar]

Here is a separate eng for wRASP users. The motors with more than 6 delays have been changed, this one should work.

ex.
6,7,8,9,10,11,12,13,14,15,16 -> 6,8,10,12,14,16

This way the min and max delay are available plus some in the middle.


André

View attachment CTI_Feb2010v2_ALL _wRASP.eng

 

[Pantherjon]

I really appreciate the work you are doing Andre..However, since the delay adjustment tools for CTI only have 4 settings(for 29mm and 38mm), maybe just list 5 seperate delays? The max then minus 3,5,7 and 9..Example motor has a max delay of 15 then you would only need to show 5 delays: 15 , 12, 10, 8 and 6..54mm adjustment tool you can 'dial in' ther delay from 1-10 seconds below the maximum..

 

[Menkar]

Thanks for the good words Panterjon.

The delays in the newest version are the one the motor really can have. The only exception is the version I modify to accommodate wRASP. That version only differs for the 54mm motors on which I listed a max of 6 delays.

By the way, I'm not the creator of the CTI file, I'm just the one who update it the last 2 or 3 times.

André

 

[Handeman]

Here is a separate eng for wRASP users. The motors with more than 6 delays have been changed, this one should work.

ex.
6,7,8,9,10,11,12,13,14,15,16 -> 6,8,10,12,14,16

This way the min and max delay are available plus some in the middle.


André

This file worked. No errors. There was a message about vendor ABC not being in the vendor.dat file. There were two motors that listed the vendor as being ABC. The M1790SK was listed twice, once as CES and once as ABC and the M2050BS motor was listed as vendor ABC.

Either way, the file loaded and works in the WRASP32 program.

 

[Menkar]

Thanks for the feedback.

Those two motors ABC are for Aerotech by Cesaroni :dark: and are just twin motors with a different casing if I remembered right.


I'll remove them or find another way to name them.

Now on we should have better engine files.

Thanks to everyone for the feedback and I wish a sunny and no wind summer, full of new motors to launch.

André

 

[Handeman]

Thanks for the feedback.

Those two motors ABC are for Aerotech by Cesaroni :dark: and are just twin motors with a different casing if I remembered right.


I'll remove them or find another way to name them.

Now on we should have better engine files.

Thanks to everyone for the feedback and I wish a sunny and no wind summer, full of new motors to launch.

André

No need to rename them or change anything. Since I know what ABC is, I can add that to the vendor.dat file and problem solved.