Some how I was persuaded to do a build thread on my G-FORCE so why not. Anyway first set of pictures of all the parts laid out. I already have a few ideas of how I'm going to build this. Since this will be my Level 1 rocket I'm debating about using epoxy to apply fillets to reinforce the fins. I might use epoxy clay since it's easy to work with and I could do all the fins at once without having to wait. For those of you who used it, you know how hard it sets up. It's like concrete after it dries 24 hrs.
The quality of the fins are ok at best, but they could use some work to get rid of the spots where they molded them. I want to build it strong enough, but not bullet proof and keep it somewhat light.
I might go with an I200W-10 for my Level 1 flight.
I'll be eliminating the thrust ring and mesh and going with an Aeropack retainer.
The quality of the fins are ok at best, but they could use some work to get rid of the spots where they molded them. I want to build it strong enough, but not bullet proof and keep it somewhat light.
I might go with an I200W-10 for my Level 1 flight.
I'll be eliminating the thrust ring and mesh and going with an Aeropack retainer.