Fat Boy XL

[DragonRocketry]

There is one 29mm and one 38mm ready to go. I will not get a chance to do more till this weekend.

Thank you for your support.

 

[DragonRocketry]

Both sizes are back in stock. Thank you for your support. Also I want to see some build threads on here, so post your build.

 

[darrenf]

Just received my kit, that was super fast, 69 hours from order to receipt! Kit looks fantastic, I didn't expect a screw on motor retainer to be in there too!
So, this is my first experience with 3d printed parts. I'm guessing I can just sand the grooves out of the nosecone? Any recommended steps or coarseness?

Thanks again!

 

[DragonRocketry]

Just received my kit, that was super fast, 69 hours from order to receipt! Kit looks fantastic, I didn't expect a screw on motor retainer to be in there too!
So, this is my first experience with 3d printed parts. I'm guessing I can just sand the grooves out of the nosecone? Any recommended steps or coarseness?

Thanks again!

I hit it with 320 paper to break the shine and the use a few coats of hi build primer. I use spot puddy for any grooves that primer will not fill and then sand it smooth once everything dries.

 

[SmurfTacoSupreme]

What material is the NC? PLA, PETG, ABS?

 

[DragonRocketry]

What material is the NC? PLA, PETG, ABS?

PETG

 

[DragonRocketry]

Just added more 29mm kits on the site

 

[DragonRocketry]

more 29mm have been added to the site. Thank you everyone for your support.

 

[KenECoyote]

more 29mm have been added to the site. Thank you everyone for your support.

Stop tempting me!

 

[DragonRocketry]

Stop tempting me!

Look it is shiny......LOL

 

[KenECoyote]

Look it is shiny......LOL

That, my lad is my wife finding out I bought another rocket.

 

[DragonRocketry]

That, my lad is my wife finding out I bought another rocket.

Looks like my wife earlier today when she saw the box that show up today....

 

[KenECoyote]

What do the decals look like?

 

[DragonRocketry]

What do the decals look like?

Look at this build thread https://www.rocketryforum.com/threads/dragon-rocketry-fat-boy-xl-build.179180/

 

[KenECoyote]

 

[KenECoyote]

I gotta say that @DragonRocketry is really cool with the quick shipping cost refund. I ordered the FB last night and got a $5 refund on shipping early this morning!

Definitely appreciated with the crazy cost of shipping nowadays.

 

[ThePlmbr]

My finished and painted Fat Boy XL. With recovery gear and decals it weighs 37 oz with out a motor.

 

[ThePlmbr]

With the decals. I will fly it on an Aerotech G125T to about 870'

 

[DragonRocketry]

With the decals. I will fly it on an Aerotech G75M or G80T. About 960' with the G80T.

Looks good. When is it flying?

 

[ThePlmbr]

It will fly tomorrow. 4/8 At the site of LDRS 41. The Bong State Park in Wisconsin.

 

[DragonRocketry]

It will fly tomorrow. 4/8 At the site of LDRS 41. The Bong State Park in Wisconsin.

Get Picture/video

 

[Hobie1dog]

Will look forward to video

 

[ThePlmbr]

On the pad at Bong. Sorry all, no video. It was a good flight. Flew to 875' on a Cesaroni G115 White Thunder. Easy recovery.

 

[DragonRocketry]

On the pad at Bong. Sorry all, no video. It was a good flight. Flew to 875' on a Cesaroni G115 White Thunder. Easy recovery.

How much nose weight did you add?

 

[ThePlmbr]

Sorry I must be tired. The Fat Boy XL flew on a 29mm, Aerotech G125T. I used 4 oz of nose weight. It flew very straight and had a bit of a whistle.

 

[rfjustin]

Sorry I must be tired. The Fat Boy XL flew on a 29mm, Aerotech G125T. I used 4 oz of nose weight. It flew very straight and had a bit of a whistle.

Nice rocket and nice flight, pics not great, but

better than nothing...

 

[ThePlmbr]

Thanks Justin. They are good.

 

[John Kemker]

Here's my Fat Boy XL. All 20 lbs. of him.

 

[DragonRocketry]

Here's my Fat Boy XL. All 20 lbs. of him.

View attachment 573934

29 or 38mm motor mount?

 

[KenECoyote]

29 or 38mm motor mount?

I had one. Usually 18mm or 24mm.