Sanity check for vent holes for Jolly Logic AltimeterTwo.

[NeilD]

My Jolly Logic AltimeterTwo will be riding in a 2.56" x 10" payload tube. There will be nothing else in the payload. I've made 4 evenly spaced 1/8" holes about 3" from the tube opening as not to be blocked by the nose cone. This is a mid-power rocket that will be flying on F - G.

Will that be sufficient for the altimeter?

Thanks for any feedback.

 

[bobbyg23]

Plenty. Send it.

 

[NeilD]

Plenty. Send it.

Thanks!!

 

[BEC]

Yep. But restrain it so it doesn't bounce around....that would play havoc with the accelerometer-based data from A2.

 

[NeilD]

Yep. But restrain it so it doesn't bounce around....that would play havoc with the accelerometer-based data from A2.

Thanks. I'm working on that. Trying to figure out a way to suspend it so it has shock absorption.

 

[teepot]

Rubber bands.

 

[lakeroadster]

My Jolly Logic AltimeterTwo will be riding in a 2.56" x 10" payload tube. There will be nothing else in the payload. I've made 4 evenly spaced 1/8" holes about 3" from the tube opening as not to be blocked by the nose cone. This is a mid-power rocket that will be flying on F - G.

Will that be sufficient for the altimeter?

Thanks for any feedback.

Altimeter Port Sizing