I'll be ordering one of those!
They're awesome. Money well spent.
I'll be ordering one of those!
I hope that's five toes per foot, the poor little things.Five fins. Wombats have five toes.
That sounds intriguing, if only because there are so many things it might mean. Would you sketch that, please?Another was fins that were 3/4 circles going from small to large from top to bottom.
As long as neither of you backwashed, what you share is up to you....I just finished that same beer.
Careful with wires being shrunk next to allthread. Threads have been known to short through insulation. Personally I would heatshrink the allthread first. YMMV.When I mount the charge cups, I cut off the threads on the backside so they don't interfere with the sled and components:
I don't know if these national wildlife themes are meant to appeal to your countrymen or to foreigners. I like them, but I don't like intercontinental shipping.
I never did weigh the two twin rockets I gave you. Have you weighed them? They look like they should be pretty stable for 54mm.The I229T is a one-grain 54mm motor similar to the ones I'm planning to fly the rockets you gave me on. It's on the lower end of "I" impulse, but not low enough for me to call it a baby I, though that's subjective.
I'm guessing Mega Max hit over 1000 feet judging by how small it looked and how long it took to fall back to the ground, but I'm not completely sure. Like I said, I forgot to put my AltimeterThree in it to get actual data.
good stuff, right? really tasty for something so strong... 8.2. we have a local beer here in tampa called jai alai , 9.0 i think, and it tastes like shoe polish and chewing tobacco. horrible. lolI just finished that same beer.
Careful with wires being shrunk next to allthread. Threads have been known to short through insulation. Personally I would heatshrink the allthread first. YMMV.
Sounds like you use my favourite type of heatshrink too . Works a treat. I rarely use the un-glued tubing.My method does vary in that I use marine heat shrink that has a heat sensitive glue, which bonds the wires to the allthread.
Even if they do, it's still their own business.As long as neither of you backwashed, what you share is up to you....
Well, it is a nice looking kit after all.Didn't buy this... $151.18 AUD is a bit steep for a $9.95 US kit.
https://www.ebay.com.au/itm/363337855039?
Enter your email address to join: