• If you have bought, sold or gained information from our Classifieds, please donate to Rocketry Forum and give back.

    You can become a Supporting Member which comes with a decal or just click here to donate.

Sold Aerotech Reloads & New + Used Hardware, 54mm, 75mm, 98mm mostly L, M, & N

The Rocketry Forum

Help Support The Rocketry Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

wadavidson

Well-Known Member
Joined
Oct 10, 2016
Messages
312
Reaction score
67
OK, here we go!
For Sale: Lots of large Aerotech reloads and hardware, 9x N, 17x M, 10x L, & 28x K. Maybe a few buddies or fellow fliers can go in it together and purchase multiple items. Willing to consider lot purchase. I am going to try and sell hardware with at least one reload as I do not want to sell all hardware and have reloads with nothing to load them into. This may change if there is left over hardware.
The prices are reduced well below Aerotech old pricing from two years ago so most of these are a real bargain especially considering current prices. Also, do not have to worry about availability, I have all of these stocked in my warehouse.

Will need to be picked up at my factory in Jessup Maryland about 15 minutes from Baltimore and about one (1) hour from the MDRA flying fields.

Take a look its allot of good stuff.

Thanks Bill D.
 

Attachments

  • Aerotech available motors8252021.pdf
    150.6 KB · Views: 500
Bill I will take the complete 54/2560 complete motor. And the K1275. And one of the K540M Can I have someone else pick it up?
 
Last edited:
Okay, I think some of us from the midwest need to road trip to visit Bill and haul some goodies back!

Tried that, had to pull the plug. Had a flight booked to BWI to visit with (3) insurance carriers on the east coast, but based on the rise in Covid cases again, invitations for on site visits were rescinded. I figured fly in, then drive goods home. That trip has been pushed back to November at the earliest. It was an exciting thought there for a hot minute.
 
Tried that, had to pull the plug. Had a flight booked to BWI to visit with (3) insurance carriers on the east coast, but based on the rise in Covid cases again, invitations for on site visits were rescinded. I figured fly in, then drive goods home. That trip has been pushed back to November at the earliest. It was an exciting thought there for a hot minute.

For me, I'd avoid the Tube of Toxins and just drive out and back.

If I could get enough solid committments who'd pay Bill in advance, and give me a bit for gas, etc, I'd consider taking the time to make the drive.
 
Bill,
I would like one of the "USED" Aerotech 98/7680 hardware packages. How much is it with shipping to Illinois, and how can I pay?
Thank you,

Tom Long TRA 8087, NAR 49538
 
@wadavidson
Wow!,

I am really interested in the "New" 98/7680 hardware but I'm in Illinois. Would you consider shipping (on my dime)?

Tobor

Well, maybe we can get him to combine some shipping. I REALLY want a gold 98/10240 motor case. And I'll pay to have it shipped to me, no problem....:clapping::clapping:
 
Bill,
I would like one of the "USED" Aerotech 98/7680 hardware packages. How much is it with shipping to Illinois, and how can I pay?
Thank you,

Tom Long TRA 8087, NAR 49538
Replied to your PM. Yes i can ship to you. What is your zip?
 
Well, maybe we can get him to combine some shipping. I REALLY want a gold 98/10240 motor case. And I'll pay to have it shipped to me, no problem....:clapping::clapping:
I can ship you one of those cases no problem. I dont have as many 10240 reloads as i thought. Can ship this week send me a pm
 
Have been holding off on responding, I apologize to everyone but I had a few individuals kicking tires to buy everything. This has not happened but one individual did buy all of my Ns so now I am a little more willing to split things up.
New list is attached.
 

Attachments

  • Aerotech available motors8292021.pdf
    145.2 KB · Views: 114
I sent you a text about a couple motors a few days ago ... Let me know if those are OK.

MIke
 
OK, here we go!
For Sale: Lots of large Aerotech reloads and hardware, 9x N, 17x M, 10x L, & 28x K. Maybe a few buddies or fellow fliers can go in it together and purchase multiple items. Willing to consider lot purchase. I am going to try and sell hardware with at least one reload as I do not want to sell all hardware and have reloads with nothing to load them into. This may change if there is left over hardware.
The prices are reduced well below Aerotech old pricing from two years ago so most of these are a real bargain especially considering current prices. Also, do not have to worry about availability, I have all of these stocked in my warehouse.

Will need to be picked up at my factory in Jessup Maryland about 15 minutes from Baltimore and about one (1) hour from the MDRA flying fields.

Take a look its allot of good stuff.

Thanks Bill D.
Bill,
I am interested in 8 of the M motors, 2 of the N motors, and 2 K motors.
Would you be willing to ship reloads and DMS to 94903?
Thanks.

Jim Green
Prefect - Aeropac
[email protected]
TRA #02586 L3, TAP
 
All of the N motors have been sold. As a not to all I am charging a rate of $35 to ship large 98mm hardware. This is to wrap them, box them up and then ship FeDex next day air. So when you pay for this hardware you will have it the next day.
 
OK, here we go!
For Sale: Lots of large Aerotech reloads and hardware, 9x N, 17x M, 10x L, & 28x K. Maybe a few buddies or fellow fliers can go in it together and purchase multiple items. Willing to consider lot purchase. I am going to try and sell hardware with at least one reload as I do not want to sell all hardware and have reloads with nothing to load them into. This may change if there is left over hardware.
The prices are reduced well below Aerotech old pricing from two years ago so most of these are a real bargain especially considering current prices. Also, do not have to worry about availability, I have all of these stocked in my warehouse.

Will need to be picked up at my factory in Jessup Maryland about 15 minutes from Baltimore and about one (1) hour from the MDRA flying fields.

Take a look its allot of good stuff.

Thanks Bill D.
I would be interested in a 54/1706 or 54/2560 hardware set if its still available.

Thanks,
Powderman
 
Latest updated list. Still lots of good stuff on here. Updated based on what people have purchased and what I thought I had but did not.
Also, reduced the Super Thunder loads even more $ realizing they are a good bit more expensive than others (just the way it is). Someone needs to pick up this used N complete motor casing with closures;). Only fired 1-2 times. You will probably never see one again at this price.
 
forgot to attach
 

Attachments

  • Aerotech available motors922021.pdf
    134 KB · Views: 147
Any 75mm hardware
I do have some 75mm hardware I will list. Was just taking all of my inventory in waves as it can be difficult to field all of the messages and emails. Also didn't want to sell all of the cases and have a pile of reloads (doesn't seem to be a problem on the 75mm side anymore).
I believe I have a new 75/2560 & 5120 full motors with closures.
 
Back
Top