Sold High Power Kits

[Scott S]

I've had these kits sitting around for quite a while and I've realized I'm never going to build them.

Mac Performance RainMaker, Details HERE Unboxed for pictures today. Looking for what I paid $399 plus shipping. Extras include a fin guide and a Nosecone Bay to get a tracker above the carbon fiber tube. SOLD



MadCow 4" Nike-Tomahawk 2 stage Kit All fiberglass. $250 plus shipping - SOLD



Rocketry Warehouse G3 All Fiberglass - $175 plus shipping - SOLD


Partially Built Wildman Blackhawk 54 Fins attached and 1 layer of tip to tip. Needs some sanding. $175 plus shipping. -



Let me know if you need any details on any of the kits.

Scott

 

[0011001100]

MadCow 4" Nike-Tomahawk 2 stage Kit All fiberglass. $250 plus shipping

Is the nose wrapped in something? I'm very tempted by this and could possibly pick it up in the fall at one of the MDRA launches

 

[Scott S]

Yes, it's still in the paper from being unboxed.

 

[David Schwantz]

Interested in the Tomahawk. Cant find on website. What are the specs of the kit? Thanks.

 

[Troy3003]

I saw this online if this helps

 

[0011001100]

Yes, it's still in the paper from being unboxed.

I'll take it if you can hold it till this fall for pickup.

 

[Scott S]

Sorry Trevor, someone bet you to it. I do have some stuff you may be interested in, let me know when you'll be at the next launch. Scott

 

[David Schwantz]

p

 

[Rex]

Black hawk still available?

 

[Scott S]

Black hawk still available?

Yes it is.

 

[lucanica]

PM sent regarding the Blackhawk.

 

[fyrwrxz]

Rangdangnabbit! ^

 

[hball55]

Rangdangnabbit! ^

They’ve only been available since June 2021, you been sleeping?

 

[fyrwrxz]

They’ve only been available since June 2021, you been sleeping?

Nope, just a cheep, lazy bastard whom already has too many fricking rockets! Plus, I'm really bored so I can troll everybody! Nurse Rachett won't let me sand anything in bed. I don't trust her to paint anything and she can't solder.

 

[ep29030]

Can't sand in bed? Oh, the humanity. Good thing you can still glue.

 

[tmhorvath]

Nope, just a cheep, lazy bastard whom already has too many fricking rockets! Plus, I'm really bored so I can troll everybody! Nurse Rachett won't let me sand anything in bed. I don't trust her to paint anything and she can't solder.

Fyrwrxz where do I find information on that launch control you had?

 

[fyrwrxz]

Fyrwrxz where do I find information on that launch control you had?

Sorry, which one as I have several. Out of all, maybe you are asking about the six pack. The one set up was built for club launches was used extensively by DART (317) and SDTRA in the 90's and up to the last Plaster Blaster for low power and the TARC kids. It is not a commercial model. Sorry but whatever schematics I had are long gone. It will handle enough voltage for High power, just not away cells ( you really need a relay system for that). I had don't know if you are aware, but I just had surgery and currently bedridden for the healing process. I may take another week or so before I'm stable enough to get pictures. If you are really serious, it would be around $300 with 6 cable runs for LPR. Shipping shouldn't be too bad as I have a professional guy I've been dealing with for years that can make sure all the delicate stuff gets thru the monkey powered sorting shift. It has six pads capable of individual, selectable, or all fire for drag races via toggles. Key safety, arming and continuity check lights and handles clusters easily. The down side is the battery. As it sits now, it's plumbed for an industrial ( think fork lift) connector going to a bank of rechargeble UPS (think computer banks) batteries that can be used all day and recharged over night. That component is wayy too heavy to ship. I can give you a mating clip you can wire yourself to any standard automobile battery if you desire to go forward. You could prolly build one with quality components like this for around 150-200 and circuit plans are out there. You kinda have a captive audience right now, so if you have any questions, just know I am periodically awake at random times until off the pain meds. Right now, I'm keeping the single fire system I have for ejection charge testing, but I can walk you thru building your own if you wish. Warning, retired aerospace engineer (Atlas, Shuttle, yadayadayadda) and sometimes I over explain things. I don't think anybody is stupid, just don't want to be misunderstood. Where are you and are you going to LDRS 40? best -dave-

 

[fyrwrxz]

Can't sand in bed? Oh, the humanity. Good thing you can still glue.

Shhhh, be vewy, vewy qwiet. I've lost the cap to the superglue in the covers somewhere. Did you know Egyptian cotton is very sharp when you try to break off the edges? Does this wash out? Asking for a friend.

 

[lucanica]

Hello Guys!

Although the OP sent me a PM confirming the Blackhawk was still available, I didn’t get any replies from him since then.

Should anyone can contact Scott S by other means, I’ll appreciate your help in letting him know I’m still interested.

Cheers from the far south!

H

 

[KenRico]

Yes I asked about the blackhawk too with a freight question & did not get a reply either

 

[fyrwrxz]

Yes I asked about the blackhawk too with a freight question & did not get a reply either

Kinney!!! Awake for a bit, before the next round of meds. Hopefully more 'with it' in a few days. Stuck in bed. Still going to LDRS, but this put a serious crimp in my new builds. Hit me up on my email.

 

[Scott S]

Hello Guys!

Although the OP sent me a PM confirming the Blackhawk was still available, I didn’t get any replies from him since then.

Should anyone can contact Scott S by other means, I’ll appreciate your help in letting him know I’m still interested.

Cheers from the far south!

H

Hi Guys. Sorry for not getting back. Life getting in the way. PM'd Lucanica as he reached out first. Will update this thread with a status.

 

[Scott S]

Last kit has been SOLD