Hi, so I assembled an old 29mm* AT reload and wondering why the instructions note that you install the delay spacer and there should be 1/16-1/8" sticking up...later you add an o-ring and have it up against the insulator disk, but the space makes the o-ring basically floating loose. Am I missing something?
(Sorry if this is something stupid missed, I've been away for years and just coming back.)
*Edit: 29mm (using a mmt 38mm adapter).
(Sorry if this is something stupid missed, I've been away for years and just coming back.)
*Edit: 29mm (using a mmt 38mm adapter).
Last edited: