Found Perfectflite parts

[cwbullet]

I am lookign for the firefly display and the LED and speaker for the Perfectflite CF. Anyone know where I buy these?

 

[Wayco]

The speaker is available now at Perfectflite:
http://www.perfectflitedirect.com/amplified-external-beeper/

 

[cwbullet]

Thanks.

 

[BEC]

For the Field Data Display, the only thing to do is keep an eye on perfectflitedirect.com. They only make them in small batches once in awhile....

 

[cwbullet]

For the Field Data Display, the only thing to do is keep an eye on perfectflitedirect.com. They only make them in small batches once in awhile....

I have noticed that. They need a notify when back in stock feature.

 

[Newguy]

I am lookign for the firefly display and the LED and speaker for the Perfectflite CF. Anyone know where I buy these?

I have an extra speaker and LED to trade for a usb transfer assembly. I broke the wires off the little connector.

 

[cwbullet]

I have an extra speaker and LED to trade for a usb transfer assembly. I broke the wires off the little connector.

I will see what I have this weekend.

 

[Art Upton]

I have an extra speaker and LED to trade for a usb transfer assembly. I broke the wires off the little connector.

If CW bullet does not have one, and you know about electronics you can do this.

I use this wire that is in stock: http://www.perfectflitedirect.com/pigtail-cable-for-dt4u/
And then use the Male/Male Breadboard jumper cables to match up the RX, TX, Ground to a FTDI USB adapter many ardunio folks use:
Remember RX goes to TX and TX goes to RX.

Get a FTDI USB to TTL Serial 3.3v adapter on Sparkfun and use Male to Male jumpers. The amazon small $5 ones are breaking down and having driver issues, the one I got years ago was a real FTDI chip and now on AmaZon they are not anymore. Spark Fun: https://www.sparkfun.com/products/9873

You will have to map the wires/jumpers between the two by reading the owners manual pinout on the StratoLogger pin out. You do not connect V+ between them, only the data lines. Your Altimeter will be powered by it's battery and your USB/TTL powered by the USB.

Art - K8XG

 

[Newguy]

CW,
I ordered and received a USB transfer kit. Do you still need the LED and speaker for the Perfectflite? send me a PM

 

[cwbullet]

CW,
I ordered and received a USB transfer kit. Do you still need the LED and speaker for the Perfectflite? send me a PM

I have this now. Now I just need the display.