LOC Precision new 1.9" Blaster

[bobbyg23]

I was chosen by LOC to receive a test model of their new 1.9" series. TTW fins, plywood centering rings, chute protector, nylon chute and kevlar shock cord. Eye bolt in the upper cr to attach the shock cord. 24mm motor mount. 12" parachute and 18" tall.

 

[Adam3836]

I was chosen by LOC to receive a test model of their new 1.9" series. TTW fins, plywood centering rings, chute protector, nylon chute and kevlar shock cord. Eye bolt in the upper cr to attach the shock cord. 24mm motor mount. 12" parachute and 18" tall.View attachment 425342View attachment 425343View attachment 425344View attachment 425345

Looks like a solid kit
What’s your first impressions of it?

 

[bobbyg23]

I used an old engine hook for my retention. I like the eye bolt in the centering ring.

 

[bobbyg23]

Fins and motor mount installed.

 

[bobbyg23]

I tried something I saw in another group for the shock cord. I tied a loop at both ends and just looped it through the eye bolt. Then attached the red shock cord to the loops and the fireproof blanket. I attached the other end to the nosecone and mad a loop about 3" from the nosecone and attached the parachute to that loop.

 

[bobbyg23]

Looks like a solid kit
What’s your first impressions of it?

I like it. This is my first LOC kit. parts fit great. The only thing I would like is a screw on motor retainer.

 

[bobbyg23]

Launch lugs installed. Fillets on the fins. Ready for paint.

 

[Adam3836]

Looking good
Looking forward to seeing the final paint and hearing how she flys

 

[grouch]

LOC is freaking killing it these days. Looks like fun.

 

[smugglervt]

I like it. This is my first LOC kit. parts fit great. The only thing I would like is a screw on motor retainer.

Estes 24mm plastic motor retainer would be a cheap option.

 

[Gramparocket]

Rocketarium has very nice aluminum retainers for 24mmt

 

[DMehalko]

this looks pretty sweet for aerotech 24/40 loads

 

[bobbyg23]

Finally had a chance to get some paint on it. Didn't know what colors to do so just did yellow.

 

[bobbyg23]

What an amazing flier. Launched today on a D12-5. Great flight.

 

[DMehalko]

Nice! Neat little kit, I’ll snag one if it becomes available

 

[bobbyg23]

They are now available.

https://locprecision.com/product-category/rockets/1-9-diameter/

 

[tOD]

I saw their ad in Sport Rocketry and ordered a "Photon" kit. Should be arriving soon. I'll probably add an Aeropack retainer and mini rail buttons.

 

[Bdpeters]

For some reason I am not able to bring the 1.9 kits up on their website right now. Looks like a fun kit. Loc has got a nice stable of rockets.

 

[Buckeye]

The LOC ads and website say both 1.8" and 1.9." Which is it? Is the tubing the same as Aerotech's 1.9" (Cheetah, Aerreux, etc)?

 

[tOD]

I got an email notification today that my kit is on the way

 

[Back_at_it]

I saw their ad in Sport Rocketry and ordered a "Photon" kit. Should be arriving soon. I'll probably add an Aeropack retainer and mini rail buttons.

Stopped by LOC on Tuesday and picked up the Photon. Looks like it's going to be a great kit. The kit comes with 1010 rail buttons so no need to add them.

I got to see the Blaster and the new RAM while I was there. Looking forward to the build.

 

[o1d_dude]

Just ordered the Blaster and few parts I was going to have to order anyway.

YOLO

 

[tOD]

My kit arrived yesterday. I'll get a few pictures when I get a chance.

 

[o1d_dude]

My Blaster arrived today.

Great LOC quality as usual.

The weight of the nosecone probably means no additional ballast forward needed.

Looking forward to adding this bad boy to my LPR/MPR fleet.

Oddly, my sealed kit did not contain the usual instruction sheet. No big deal for me as I consider instructions to be more along the lines of “suggested guidelines.” LOL! I did drop the an email to let them know as n00bs might struggle a bit without the instructions.

LOC is now carrying the line of 1.9” components (airframe, couplers, centering rings and bulkheads, etc.)

 

[tOD]

I got as far as getting the kit out of the bag. Looks like it will be fun to build. Should be a good performer at my club's field. I think I'll order a couple of CTI 1 grain reloads for the maiden flight.

 

[o1d_dude]

I got as far as getting the kit out of the bag. Looks like it will be fun to build. Should be a good performer at my club's field. I think I'll order a couple of CTI 1 grain reloads for the maiden flight.

Yours came with the instruction sheet.

 

[Nytrunner]

Love LOC, great hardware. But I must ask, was a new odd size of body tube really necessary?

 

[heada]

Aerotech also has kits in 1.9in so it's not unheard of.

 

[Bdpeters]

Makes me wonder if they will be selling components in this size. Might make a good way to repair my Aerotech Cheetah. I like loc tubing

 

[heada]

Just checked and 1.9" diameter, 35" long VT is $8.50, 8" long coupler is $2.30