If you are using a TeleMega you can parallel up multiple output channels to trigger on different parameters. I used this method for my HEI. One channel was set to trigger on a timer after booster burnout, the other channel was set to trigger if the tilt got to a set tilt (15deg I think). So a straight flight would trigger on timer, and a tilting flight would trigger on tilt. Whichever comes first wins. The tilted flight would not achieve as much altitude but staging could still be executed safely. Both of those channels had lockouts to prevent ignition if tilt exceeded a wider trip level.
On another note, the TeleMega has four additional output channels. If you don't use them for outputs you can use them as analog inputs for monitoring all sorts of other things. Power supplies on the other altimeters is what I used them for. I have also used them to log analog servo voltages on my Vertical Trajectory System, allowing an all-in-one logging system.
On another note, the TeleMega has four additional output channels. If you don't use them for outputs you can use them as analog inputs for monitoring all sorts of other things. Power supplies on the other altimeters is what I used them for. I have also used them to log analog servo voltages on my Vertical Trajectory System, allowing an all-in-one logging system.