Eric Nantel - DiaLFonZo
Well-Known Member
- Joined
- Oct 6, 2019
- Messages
- 121
- Reaction score
- 57
Hi All,
So i started the build of my Estes Big Daddy yesterday.
I wanted to change some things here and there and share it as well.
1. I wanted to change the bulkhead which are cardboard from the kit. Little design and cut from a 1/8" plywood sheet with some lighten area. (sorry, really bad picture and epoxy gluing)
2. Found the body a little incomplete so i designed a 3D printed tailcone.
3. Because i'm cheap, i designed a 3D printed motor retainer as well.
4. I'll be adding a real parachute, kevlar shock cord and reusable wadding.
More to come...
So i started the build of my Estes Big Daddy yesterday.
I wanted to change some things here and there and share it as well.
1. I wanted to change the bulkhead which are cardboard from the kit. Little design and cut from a 1/8" plywood sheet with some lighten area. (sorry, really bad picture and epoxy gluing)
2. Found the body a little incomplete so i designed a 3D printed tailcone.
3. Because i'm cheap, i designed a 3D printed motor retainer as well.
4. I'll be adding a real parachute, kevlar shock cord and reusable wadding.
More to come...