GlenP
Well-Known Member
- Joined
- Oct 3, 2014
- Messages
- 3,066
- Reaction score
- 1,580
I should probably just re-print and re-coat another decal sheet, but since I had already put a couple of heavy coats on it before I dropped it face down with a wet coat, I tried sanding it down with some 400 grit to get the little pieces of dirt out of it without going into the ink layer. It might be usable after another top coat, we'll see.
In other news, his Little Joe I and II brothers are on the way, along with THE #1969 kit.
In other news, his Little Joe I and II brothers are on the way, along with THE #1969 kit.