dford
Tada
- Joined
- Apr 23, 2016
- Messages
- 330
- Reaction score
- 2
I picked up a 38mm Go Devil at last weeks hump day sale and the fin guide templates, yes both, are off +\- 1-2 degre
I kind of figure they supplied these for a reason. The fins need to be pretty much spot on.
Should I make my own guide or try to get new ones considering the necessity for it to be absolutely correct? I mean this thing does ride mach+ and high altitude....??
Thought I should mention I traced out the guide on paper and used a protractor at least four times to make sure it isn't me messing it up. I also placed lines on the airframe with angle iron according to the guide, turned the guide along the lines and when turned from one line to the next they are off the same amount as on paper.
I kind of figure they supplied these for a reason. The fins need to be pretty much spot on.
Should I make my own guide or try to get new ones considering the necessity for it to be absolutely correct? I mean this thing does ride mach+ and high altitude....??
Thought I should mention I traced out the guide on paper and used a protractor at least four times to make sure it isn't me messing it up. I also placed lines on the airframe with angle iron according to the guide, turned the guide along the lines and when turned from one line to the next they are off the same amount as on paper.