TangoJuliet
Well-Known Member
- Joined
- Jun 26, 2016
- Messages
- 1,239
- Reaction score
- 13
I decided I needed a better way to store my rockets than just leaning them against a wall or corner of two walls, so I started putting together some 3/4" SCH 40 PVC, some 90* Elbows, and a few 4-Ways. Appropriately sized Dowels and/or spent motor casings are wrapped with Blue Painters Tape until they fit snugly into the 90* Elbows (If I had a lathe, I'd probably turn down larger dowels to fit the PVC and then turn them down more for the motor mounts instead of wasting tape, but compared to a lathe, tape is cheap!) Right now it's only sized for 18 and 24 mm motors. Nothing is glued together, only press-fit, making it infinitely expandable, and the wide foot print means I can move it, loaded with rockets, into my van for transport.