Kosdon delay instructions?

[bill2654]

Does anyone know of any delay assembly instructions for the older Kosdon cases? I saw some that showed 3 or 4 stacked o-rings but they were for the KBA. Mine are the older cases without the thrust ring that I plan on using soley for EX propellant. I am looking for both 29mm and 38mm instructions.

 

[UPscaler]

Same old same old, stack the orings, grease them, and put them in the forward closure. I have a few papers that our kosdon dealer made that show the motor going together. I can scan them, but I would have to get the files and tote them back here to the library, since our internet is temporarily down. Like I said though, it's the same thing, just stack the orings around the delay. I've flown several in the past couple months in 29mm, and one in 38mm


Braden

 

[JDcluster]

Actually; there were some metal washers that go in between the o-rings.
I might have the assembly drawings here somewhere....

 

[bill2654]

Never mind. Dave just emailed them to me. Thanks everyone.