GregGleason
Well-Known Member
- Joined
- Nov 13, 2009
- Messages
- 4,674
- Reaction score
- 45
With that switch, you are reinventing the wheel. I love Perfectflite and their products, but they need to get with the times regarding switches! Get yourself a Schurter rotary switch and be done with it. That's probably misspelled, by the way.
Then it sounds like you need one of these instead.
View attachment 247007
I epoxy them into a hole in the sled, in a position that will line up with a static port.How do you mount one of those?
I epoxy them into a hole in the sled, in a position that will line up with a static port.
Pic (for others):
View attachment 247003
This is a switch recommended by PerfectFlite. It's small and works with a pull-pin. It can be configured as an NO or an NC switch.
Greg
Thanks! Where can these be bought?
Or try these screw switches from Missleworks https://www.missileworks.com/store/#!/Power-Switches/c/5760490/offset=0&sort=normal
Those are similar to the Aerocon offerings.
Greg
I epoxy them into a hole in the sled, in a position that will line up with a static port.
Yeah, with a little corrosion.Maybe just the color of the photo, but is that solder I am looking at on the switch?
Yeah, with a little corrosion.
Enter your email address to join: