Cutting phlexible phenolic

[bigone5500]

What's the easiest way?

 

[Kaycee]

Miter saw. I wrap a piece of masking tape around the tube covering where I want to cut, and mark it with a Sharpie.

 

[dixontj93060]

Miter saw. I wrap a piece of masking tape around the tube covering where I want to cut, and mark it with a Sharpie.

+1 to that.

 

[bigone5500]

So would you say that a table saw with a 80 tooth blade would work? I don't have a miter saw.

*edit* - What about this blade? https://www.lowes.com/ProductDispla...gId=10051&cmRelshp=req&rel=nofollow&cId=PDIO1

 

[Kaycee]

So would you say that a table saw with a 80 tooth blade would work? I don't have a miter saw.

Yes, a table saw will work. Make a -stop- for the tube and rotate it slowly...you should be fine.

 

[bigone5500]

Yes, a table saw will work. Make a -stop- for the tube and rotate it slowly...you should be fine.

Thanks. Gonna hit up Lowes tomorrow for a fine blade.

 

[accpool]

Thanks. Gonna hit up Lowes tomorrow for a fine blade.

would a laminate cutting blade for the table saw work? i'm asking because it would make sense that more teeth would not make the edge rough.

 

[Kaycee]

Yes, a laminate blade will work fine. It will not have carbide tips but that's not an issue with cutting your tube. You'll be fine....