camera

Tldr: How would you do, fast rocket goes high makes it harder. I want to make a L2 rocket that goes up to a high altitude and has a video feed that includes the ground so that I can calculate the altitude about ground and compare it to apogee data from barometer and altimeter. My goal is at...

I finished my latest version of the RunCam2 4k Camera Mount. It can be found here: https://www.printables.com/model/532706-runcam2-4k-mk3a1-rocket-mount I included a 3" and 4" BT version along with a RunCam mockup (not my model).

I've got a RunCam Split 4 4k up forsale. This little camera just can't be beat when it comes to onboard model rocket videos. You will need to supply this camera with 5v, so if you plan to use a v3.3 LiPo Battery, you'll likely need to use a voltage booster. The booster I used was the Adafruit...

I am working on putting a recording device inside of my 54mm electronics bay. I had selected the RunCam Thumb, however, it looks like there is a 2-3 week shipping timeline for that, and I would rather not wait quite so long. The camera will be sitting inside the electronics bay, I have room for...

Has anyone had any issues with a camera, specifically the Mobius interfering with gps tracking? I see they sell a shrouded cover to reduce gps interference but didn't know if that was necessary with rocketry gps at 900 MHz

I created a fin in Rocksim to be able to sim my Mobius shroud from Additive Aerospace. Weight, dimensions, radial placement, all accurate. I threw the mod on my Madcow Blue Iguana, 2.6" w/54mm motor mount. On an L935, it sims to 17,250' without the shroud. With the shroud, it doesn't even hit...