JAL3
Well-Known Member
- Joined
- Jan 17, 2009
- Messages
- 14,333
- Reaction score
- 268
If I understand correctly, this is a design by Doug Sams and sold by Squirrel Works. It is a cool tube fin sustainer with 6 conventional fins on the booster. That's right, it is a staged tube fin rocket.
It is designed for 24mm motors and I don't fly the 2 stage configuration very often because I kind of like it and want to get it all back. Even as a single stage, it performs well.
My unimaginative paint scheme just follows the face card. The upper stage is yellow and the lower stage is orange. It's simple but effective, especially with the simple decal to set it off.
My build thread on TRF is here: https://www.rocketryforum.com/showthread.php?t=3466
The photo albums are here: https://www.flickr.com/photos/23694991@N03/collections/72157618936129577/
It is designed for 24mm motors and I don't fly the 2 stage configuration very often because I kind of like it and want to get it all back. Even as a single stage, it performs well.
My unimaginative paint scheme just follows the face card. The upper stage is yellow and the lower stage is orange. It's simple but effective, especially with the simple decal to set it off.
My build thread on TRF is here: https://www.rocketryforum.com/showthread.php?t=3466
The photo albums are here: https://www.flickr.com/photos/23694991@N03/collections/72157618936129577/
