OpenRocket issue with CTI F36 motor

The Rocketry Forum

Help Support The Rocketry Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

wfcook

Mayhem Rocketry, LLC
Joined
Nov 15, 2013
Messages
1,028
Reaction score
11
In my (latest) version of OpenRocket, the motor library appears to contain the CTI P29-1G-SS 41F36 Smoky Sam motor. However, when selecting it, you seem to in fact get the CTI P29-1G 51F36 Blue Streak motor.

The 51F36BS doesn't appear to be in the library.

Is this what everyone else sees, or am I missing something?

Also the P29-1G-CL 51F31 is listed as 24mm by mistake.
 
Last edited:
I looked and saw your problem with the F36. Since the motor is simply listed as the F36 in OpenRocket, it lists BOTH thrust curves under the one motor. At the top there is a drop down for thrust curve, and you can pick which one to use. Both the blue streak and smokey sam are listed.

As far as the F31 being listed as a 24mm, as long as the thrust curve and masses are correct, it doesn't matter.
 
Back
Top