RandyT0001
Well-Known Member
- Joined
- Jun 27, 2009
- Messages
- 455
- Reaction score
- 6
I was looking at some 11/16" PVC corner molding online and thought I could use it to make some Kuhn fin jigs of several fin thicknesses. So I went to the local big box home improvement center and bought an 8 foot long piece for about $5. I cut several pieces about 8 inches long then I carefully used my razor saw to cut the fin slots into the jigs. I sanded the slots to their final sizes. I had to practice a couple of times before I got it right, slot centered and at a 45 degree angle to the sides. Here's a pic: